Continuous Navigation Mode; Gps Receiver Override - Humminbird 786ci Operation Manual

continue to navigate and fish around a particular waypoint, even if you pass
over it multiple times.
To activate or de-activate Continuous Navigation:
1. Highlight Continuous Navigation Mode on the Navigation main menu.
2. Press the LEFT or RIGHT Cursor keys to turn Continuous Navigation
Mode On or Off. (Off, On, Default = Off)
GPS Receiver Override allows you to set which GPS receiver to use if you have
multiple GPS receivers plugged into your system. These multiple GPS receivers
may either be internal, external, or connected via the InterLink™. If you select
Auto, your unit will select a GPS receiver automatically.
NOTE: If only one GPS receiver is plugged into your Chartplotter, then Auto will be the
only option shown.
To activate or de-activate GPS Receiver Override
1. Make sure the User Mode is set to Advanced, then highlight GPS
Receiver Override on the Navigation main menu.
2. Press the LEFT or RIGHT Cursor keys to select which GPS receiver to
use. (Default = Auto)

Continuous Navigation Mode

Continuous Navigation Mode allows you to

GPS Receiver Override

(Advanced)
94 Navigation Menu Tab