Parts List; Explanation Of Parts List Arrangement; Symbols And Abbreviations - Hobart TM416 Operation And Maintenance Instruction Manual

OPERATION, MAINTENANCE, AND OVERHAUL MANUAL TM-416
MOTOR-DRIVEN GENERATOR%T, SERlES 5503A AND 5507A
SECTION 3. PARTS LIST
1.
Explanation of Parts List Arrangement
The parts list is arranged so that the illustration will appear on a left-hand page and
the applicable parts list will appear on the opposite right-hand page.
Unless the list
is unusually long, the user will be able to look at the illustration and read the parts
list without turning a page.
2. Symbols and Abbreviations,
The following is a list of symbols and abbreviations used in the parts list.
*
- Item not illustrated
A, or AMP - ampere
AC -
alternating current
AR -
as required
DC -
direct current
Fig. - Figure
hd. - head
hex - hexagon
Hz -
Hertz (cycles-per-second)
I.D. -
'inside diameter
IN - inch
KVA -
kilovolt-ampere
MFD -
m ictofarad
No. -
number
NHA -
next higher assembly
PRV - peak reverse voltage
PSI - pounds per square inch
Ref -
reference (the item has been listed previously)
TM - Technical Manual
T-R - transformer-rectifier
v - volt (when used as a prefix to a five-digit number, indicates
vendor code)
NOTE: An item which does not reflect an index number is an assembly which is
not illustrated in its assembled state, or it is similar (right-hand, left-hand,
top, etc.) to an itemwhich is.iIIustrated.
Ott 30/75
7-3
Page 1