General; Explanation Of Parts List - Hobart TM416 Operation And Maintenance Instruction Manual

OPERATION, MAINTENANCE, AND OVERHAUL MANUALTM-416
MOTOR-DRIVEN GENERATOR SET, SERES 5503A AND 5507A
SECTION 1. INTRODUCTION
1.
General
Tlie Illustrated Parts List identifies, describes, and illustrates main asse&bIies','sub~'
assemblies, and detail parts of the motor-driven generator sets manufactured by Hobart- ;: 1
Brothers Company, Power Systems Division,
Troy, Ohio 45373. These sets are Identified
as Specification No. 5503A-1 and Specification No. 5507A-1
'T.3
-
2. Purpose
The purpose of this list is to provide parts.identification and descriptive informatian to
maintenance and fprovision ing personnel for use in provisioning , requisitioning , pur-
chasing, storing,
and issuing of spare parts.
3. Arranaemen t
Chapter 7 is arranged as follows:
Table of Contents
Section 1 - Introduction
Section 2 - Manufacturer's Codes
Section 3 - Parts List
Section 4 - Numerical Index
4. Explanation of Parts List
A. Contents
The parts list contains a breakdown of the equipment into assemblies, subassemblies,
and detail parts.
All parts of the equipment are listed except:
(1) Standard hardware items (attaching parts) such as nuts, screws, washers, etc.,
which are available commercially.
(2) Bulk items such as wire, cable, sleeving, tubing, etc., which are also
commercially available.
(3) Permanently attached parts which lose their identity by being welded, soldered,
riveted, etc., to other parts, weldments, or assemblies.
B. Parts List Form
This form is divided into five columns.
Beginning at the left side of the form and
proceeding to the right, columns are identified as foIllows:
Ott 30/75
7-l
Page 1