Table of Contents
Advertisement
Configuring the Unit for Operation
Once the unit is connected to the network, the following turn-up procedures should
be performed:
T
T
Optionally, you may also choose to do the following using the EMS:
T
T
4200-A2-GN20-10
6. Change the time, if necessary. The Simple Network Time Protocol (SNTP),
which maintains the unit's clock, defaults to enabled. However, you can
change the time offset from Coordinated Universal Time (UTC) using the
TZOFFSET parameter of the SET-NE-ALL TL1 command. See the
GranDSLAM 4200 ATM Stackable DSLAM User's Guide
Change the login and password using the ED-USER-SECU TL1 command
from the defaults SUPERUSER, ASN#1500.
Change the SNMP community strings using the EMS.
Configure the syslog server at the NOC.
Configure the trap managers.
October 2002
4. Configuration
for more information.
4-5
Advertisement
Table of Contents
