Table of Contents
Advertisement
1. Installation
Unpacking the Hardware
The GranDSLAM 4200 is shipped in a cardboard shipping container. Carefully
remove the unit from its shipping container and check for physical damage. If the
unit shows signs of shipping damage, notify your sales representative.
Package Contents
In addition to this installation guide, the GranDSLAM 4200 shipping carton should
contain:
T
T
T
If anything is missing, notify your sales representative.
Before installing the GranDSLAM 4200, read the
the beginning of this document.
Be sure to register your warranty at www.paradyne.com/warranty.
1-4
HANDLING PRECAUTIONS FOR
!
STATIC-SENSITIVE DEVICES
This product is designed to protect sensitive components from damage
due to electrostatic discharge (ESD) during normal operation. When
performing installation procedures, however, take proper static control
precautions to prevent damage to equipment. If you are not sure of the
proper static control precautions, contact your nearest sales or service
representative.
GranDSLAM 4200
Two sets of mounting brackets, one set suitable for a 19-inch (483 mm ) rack
and one set suitable for a 23-inch (584 mm) rack (including Bay Networks and
Nortel)
Hardware kit (see
Table 1-3, Contents of Hardware Kit Shipped with the
GranDSLAM
4200)
October 2002
Important Safety Instructions
4200-A2-GN20-10
in
Advertisement
Table of Contents
