Table of Contents
Advertisement
Configuration
Overview
The GranDSLAM 4200 is designed to require minimal configuration before it can
be accessed by a Network Operations Center (NOC).
Initial configuration can be performed using the Command Line Interface (CLI).
The CLI is available from a terminal or PC connected to the CONSOLE port.
Additional configuration may be necessary, depending on the mode used to
manage the GranDSLAM 4200:
T
T
Additional configuration is also necessary if you do not choose to accept the
defaults that have been automatically assigned to your GranDSLAM 4200. For
more configuration information, see the
User's
Conventions Used
In this book, the Enter key means whatever key you use to submit data to your
terminal or PC. It may be called the Return key on older devices.
Characters displayed on your screen, including those you type, are shown in the
Courier font in this book.
4200-A2-GN20-10
Inband management (managing via a PVC from the NOC).
Managing out of band through the Ethernet port.
Guide.
October 2002
GranDSLAM 4200 ATM Stackable DSLAM
4
4-1
Advertisement
Table of Contents
