Management Port - Paradyne IP DSLAM GranDSLAM 4200 Installation Manual

Management Port

The MGMT (management) port can be used to connect the GranDSLAM 4200 to a
network management system using a 10BaseT or 100BaseT LAN. The MGMT
port is isolated and no user data is accessible over it. A straight-through cable is
used.
Procedure
To use the MGMT port:
4200-A2-GN20-10
1. Connect a modular 8-pin cable to the MGMT port.
2. If the GranDSLAM 4200 is in a rack, fasten the cable to a rail with a cable tie.
3. Connect the other end of the cable to your Ethernet hub or to a network
interface card in a PC.
October 2002
2. Cabling
2-9