Table of Contents
Advertisement
1. Installation
Preparation
Consider the following before installing the GranDSLAM 4200:
T T
T T
T T
T
T T
1-2
Installation Site
Your installation site should be well ventilated, clean, and free of
environmental extremes.
Installation Options
The GranDSLAM 4200 may be:
— Mounted with the included mounting brackets in a standard 19-inch
(483 mm ) or 23-inch (584 mm) rack (including both Bay Networks and
Nortel 23-inch racks), or, with separately purchased mounting brackets, in
a 21-inch (535 mm) ETSI rack. ETSI brackets are available from
Paradyne. See
Appendix B, Equipment List
As many GranDSLAM 4200 units may be mounted in a standard rack as
there are 1.75-inch (44.45 mm) spaces in the rack, so long as adequate
cooling is provided.
— Mounted vertically against a wall.
The standard mounting brackets provided can be fastened to the base of
the unit for wall mounting.
— Set on a shelf or desktop.
Up to five GranDSLAM 4200 units may be stacked on a shelf or desktop.
Different models can be mixed in a stack.
Uplink Modules
Various uplink modules are available and one must be installed in each
GranDSLAM 4200. Any uplink module can be installed in any GranDSLAM
model. Your unit may have arrived from the factory with one of the following
uplink modules already installed:
— 4201 T1 Uplink Module
— 4202 E1 Uplink Module
— 4203 8-port T1/E1 IMA Uplink Module
Power
The GranDSLAM 4200 operates from a – 48 VDC power supply (– 40.5 to
–57.0 VDC) to allow for standard power connections available in a CO. For AC
voltage environments, an external AC-to-DC power converter is required.
Other Cabling
No cables are provided with the GranDSLAM 4200. See
Descriptions, to determine what cables you need to procure before
installation.
October 2002
.
Table 1-2, Cable
4200-A2-GN20-10
Advertisement
Table of Contents
