Preface; Objectives And Reader Assumptions; How To Use This Manual; Overview - Paradyne 3800 User Manual

Objectives and Reader
Assumptions
This manual describes how to install and operate the
COMSPHEREr 3800 Series standalone and
carrier-mounted modems. The reader should have a basic
understanding of modems and their operation.

How to Use This Manual

Chapter 1 provides information about the features of
3800 Series modems.
Chapter 2 provides instructions for installing the Model
3810 and Model 3820 modems.
Chapter 3 provides instructions for installing the Model
3811 modems.
Chapter 4 provides the information required to operate
the Model 3810 and Model 3820 using the diagnostic
control panel (DCP) and the Model 3811 using the
COMSPHERE 3000 Series Carrier's shared diagnostic
control panel (SDCP).
Chapters 5 through 12 describe the eight branches of
the front panel command sets:
Chapter 5 – Call Setup
Chapter 6 – Talk/ Data
Chapter 7 – Status
Chapter 8 – Test
Chapter 9 – Configure
Chapter 10 – Control
Chapter 11 – Remote
Chapter 12 – Security
3810-A2-GB30-30

Preface

Chapter 13
operation.
Chapter 14
changing AT commands and S-registers.
Appendix A
modems.
Appendix B
by 3800 Series modems.
Appendix C
diagnostic tests when data communications problems
occur.
Appendix D
Appendix E
VF TELCO pin assignments.
Appendix F
Appendix G
options available for the four factory preset
configurations: Async Dial, Sync Dial, Sync Leased, and
UNIX Dial.
Appendix H
modems.
The Glossary
throughout this manual.
September 1998
provides an overview of fax modem
provides instructions for displaying and
provides a menu tree for 3800 Series
provides a list of the result codes produced
provides instructions for performing
provides technical specifications.
provides EIA RS-232, EIA RS-366A, and
provides V.25bis dialing information.
provides a list of all default configuration
provides an equipment list for 3800 Series
provides a description of terms used
vii