Objectives and Reader Assumptions
This manual describes how to install and operate the Model 3830
standalone modem. This manual assumes that you have a basic
understanding of dial modems and their operation.
How to Use this Manual
Chapter 1
software features, including the front panel and status indicators.
Chapter 2
factory configuration options, recovering the ability to use AT
commands, and using AT command initialization strings.
Chapter 3
Chapter 4
commands and S-Registers. These commands control all aspects of the
modem's operation.
Appendix A
data communications problems occur.
Appendix B
Appendix C
Appendix D
The
Glossary
manual.
3830-A2-GB91-30
Preface
provides information about the 3830 modem's hardware and
provides instructions for installing the modem, selecting
provides general information about fax modem operation.
provides instructions for displaying and changing AT
provides instructions for performing diagnostic tests when
lists the technical specifications of the 3830 modem.
provides EIA-232 pin assignments.
provides V.25bis dialing information.
provides a description of terms used throughout this
August 1998
v