Model 3810 Dial-Line Connection; Model 3810 4-Wire/2-Wire Leased-Line Connection; Model 3810 Rear Panel - Paradyne 3800 User Manual

COMSPHERE 3800 Series Modems
Model 3810 Dial-Line
Connection
For the Model 3810, use the following procedures to
connect the modem to the dial network interface:
1. Insert the 6-position, 4-conductor modular plug
into the jack labeled DIAL / LEASED (3820). See
Figure 2-2.
2. Insert the other end of the modular cord into the
dial network interface.
0
4-CONDUCTOR PLUG
FOR TELEPHONE SET
8-CONDUCTOR PLUG
FOR LEASED LINE
NETWORK OPERATION
(CONNECTS WITH
JM8 TYPE JACK)
2-4
PHONE DIAL
1
PWR LEASED LEASED
(3810) (3820)
6-POSITION,
8-POSITION,
Figure 2-2. Model 3810 Rear Panel
September 1998
Model 3810 4-Wire/2-Wire
Leased-Line Connection
Use the following procedures to connect a Model 3810
to the leased-line network interface:
1. Insert the 8-position, 8-conductor modular plug
into the jack labeled PHONE / LEASED (3810).
See Figure 2-2.
2. Insert the other end of the modular cord into the
leased-line network interface.
3. If the Model 3810 has a dial backup line, follow
the steps listed in Model 3810 Dial-Line
Connection section.
NMS
DTE
6-POSITION, 4-CONDUCTOR PLUG FOR
PERMISSIVE DIAL NETWORK OPERATION
(CONNECTS WITH RJ11C TYPE JACK)
98-13070-02
3810-A2-GB30-30