Diagnostic Control Panel Security Access; Status Branch - Paradyne 3800 User Manual

Diagnostic Control Panel
Security Access
NOTE
This page of the manual is
self-supporting and can be
removed to prevent unwanted
knowledge of the DCP security
access selections.
Use the DCP security access function to ''lock" the
DCP of any 3800 Series modem and prevent unwanted
user access. Two options are available for this function:
Grant and Deny.
Grant allows any branch of the Top-Level menu to be
accessed from the DCP. Deny allows access only to the
Status branch of the Top-Level menu. All 3800 Series
modems are shipped from the factory with DCP access
granted.
3810-A2-GB30-30
To access the Front Panel (DCP) Security Access
function, perform the following:
Press the key three times.
Press the key twice.
Press the key once.
Frnt Panl Acces
Grant
Select Grant to allow access or select Deny to lock
DCP access.
Either selection results in a return to the Top-Level
menu.
September 1998
Deny
F1 F2 F3
DCP Operation
4-15