Lock Button - Nyi - Mackie DC16 Owner's Manual

• ASGN + View Group – Pressing and holding the ASGN button while pressing one of the
[Groups Selector] view groups buttons [view group A-F] puts the console into assignment
Assign Mode:
mode for that view group. The SEL button LEDs of channels that are already assigned to the
View Group E
chosen view group will flash, indicating that they are assigned to that view group. From here
Song IV you're able to assign and unassign channels to the selected view group simply by pressing
the channels' SEL button.
More information about view groups may be found on pages 27-28.
• ASGN + Mute Group – Pressing and holding the ASGN button while pressing one of the
Assign Mode: [Groups Selector] mute groups buttons [mute group 1-6] puts the console into assignment
mode for that mute group. The SEL button LEDs of channels that are already assigned to the
Mute Group 3
chosen mute group will flash, indicating that they are assigned to that mute group. From here
Song II
you're able to assign and unassign channels to the selected mute group simply by pressing
the channels' SEL button.
More information about mute groups may be found on pages 29-30.
• ASGN + Talkback – Pressing and holding the ASGN button while pressing the talkback
Assign Mode:
button puts the console into assignment mode. The SEL button LEDs of outputs that have
talkback already assigned to them will flash, indicating that they are assigned to talkback.
Talkback
From here you're able to assign and unassign outputs to talkback simply by pressing the
outputs' SEL button (after chosen in the mix selector).
More information about talkback may be found on pages 39, 56.
• LOCK Button – NYI
The LOCK button is Not Yet Implemented [NYI], but will eventually allow you to change the layout
of channels and controls, perform certain lock operations and more. Stay tuned!
59
DC16 Owner's Manual