Mackie DC16 Owner's Manual page 8

DC16 Owner's Manual
(B) – Push the encoder in to select the DL32R.
DC16
Initializing...
(C) – We'll assume here that you will only be using a single DC16 at this time. Therefore, push the encoder
in to select the FOH slot.
DC16
Initializing...
(D) – Once selected, DC16 will ask if you want to auto route Dante and DL32R. Dante Auto Route
configures the headphones, monitors, talkback and stereo playback and recording signals between
the DL32R and DC16. You will almost unequivocally desire to auto route Dante, so push the "Yes"
encoder to confirm. Or press the "No" encoder if you prefer to customize the Dante routing.
(E) – Hang tight and let DC16, DL32R and Dante do its thing then you'll be on your way!
DC16
Initializing...
Connect to
Mixer:
Select
DL32R
connection
slot
DC16
Auto Route
Dante and
DL32R
Initializing...
Routing??
Connecting
to
DL32R
Slot FOH
Refresh
DL32R
Mixer list
Select Do it!
FOH MON
empty empty
Yes No
Exit
8
Exit
3 4
empty empty