Mackie DC16 Owner's Manual page 72

DC16 Owner's Manual
The channel displays on the second page, though, offer the following options:
Tom
5
GAIN
from selected
Auto return from selected channel editing:
This is a handy feature that allows you to stay on the most important – to you – ALL channel
editing function after you've made some quick SELECTED channel edits.
Ok, I know what you're thinking; it probably goes something like "Well, that sounds confusing!"
No worries, it's easy to understand... especially with an example!
• Start by rotating the encoder so it displays "10 sec".
• Next, make GAIN the currently selected (ALL) channel editor.
• Now, press a (SELECTED) channel editing button, like EQ or DYN, make a few
changes, then do nothing.
• Channel editing will return back to GAIN 10 seconds after your last edit, showing
you the full names, colors and icons for easy channel identification.
A few notes regarding this example:
First, 10 seconds was selected for the example. Feel free to rotate the encoder until you
see the choice you prefer between:
Off [Default]
10 sec
20 sec
30 sec
40 sec
50 sec
60 sec
The default [Off ] just means that there is no auto return to SELECTED channel editing.
DC16 follows your every move and stays where you leave it.
Second, any of the available ALL channel editing selections may be chosen (including most
ALT + selections).
Speaking of which – third – any of the available SELECTED channel editing selections may
be chosen (including Sends (ALT + GEQ)).
More information about channel editing may be found on pages 40-49.
Auto return Hide channel
names in
channel selected
editing channel
editing
20 sec OFF
72
Calibrate
Faders
About
Do it!
Tell Me!