Table of Contents
Advertisement
PROFXV3+ MULTI-CHANNEL ANALOG MIXERS WITH ENHANCED FX, USB RECORDING MODES, AND BLUETOOTH®
GIGFX+ Effects Engine
While the display presents the FX (and FX EQ), presets, and other parameters, it's the mixer's push-button rotary encoder
that allows you to access these fields and change them.
Simply rotate the knob until the parameter you want to change is highlighted, push the encoder in, then make the changes.
Again, additional details are coming soon. Please read on...
Back Button
The back arrow button is used as a navigation tool to go back and forth between the FX list and the current effect.
Number
1
2
3
4
5
6
7
8
9
10
11
12
Factory Reset
When a ProFXv3+ mixer is factory reset, it restores most parameters back to their default. This includes all FX parameters
and any stored presets. This is a permanent reset with no undo.
So how does one place the mixer back to its factory default? Press and hold the Studio Command Control Knob AND Back
Button simultaneously until the display shows the Mackie Running Man.
Doing a factory reset and resetting the FX EQ (see page 41) are not the same thing and will result in different
settings.
Preset Display
The Preset Display is one of the most vital features of the ProFXv3+ Series mixers. It displays
information including (but not limited to) FX (and FX EQ), presets, and other parameters.
Additional detail about all of these features may be found by continuing on.
Studio Command Control Knob
I wonder why they dismissed my suggestion for calling this the Studio Under Command
Knob...? I mean, c'mon, right?! Turn the SUCK up/down to change parameters,
push the SUCK in to select. I digress...
Pressing and holding the back button will display all 12 effects into two
Effect
columns of six. From here, one is able to rotate the endless Studio Command
DELAY
Control Knob to select one of the 12 preset effects.
ECHO
The fun thing about these preset effects is what was mentioned above...
SLAPBACK
they may be updated and tweaked to your heart's content! More on this
starting on the following page.
HALL REVERB
The different available effects presets are shown in the table to the left
ROOM REVERB
and the currently selected effect preset is shown in the display. Only one
PLATE REVERB
preset may be selected at a time. Further details of each preset is explained
CHORUS 1
on the following pages.
CHORUS 2
FLANGER
DELAY + REVERB
DELAY + CHORUS
REVERB + CHORUS
34
Advertisement
Table of Contents
