Mackie DC16 Owner's Manual page 14

DC16 Owner's Manual
Now let's take a look at Master Fader's I/O Patch. For reference, the right-hand side of the signal flow – the
DL32R side – may be seen below-left. As stated previously, the first thing routed in Master Fader's I/O Patch
is Input A (below-right). Again, Dante 30-31 is routed to Return 3-4 and Dante 32 is routed to Talkback.
DL32R
Dante
30
Return 3 Input A
31
Return 4 Input A
32
Talkback
(no default patch for Dante 1-29)
Dante
29
Main L
30
Main R
31
Monitor L
32
Monitor R
(no default patch for Dante 1-28)
In
Out
Next up are the Dante outputs. As stated previously, the Main L/R is routed to Dante 29-30
and the Monitor L/R is routed to Dante 31-32. See below.
All four are patched simultanously, but a screen shot combining both the Main L/R
and Monitor L/R is impossible. That said, all four are patched here, but we'll show
you two screenshots of the Dante routing: one of the Main L/R to Dante 29-30
(below-left) and one of the Monitor L/R to Dante 31-32 (below-right).
14