For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service. DS3232 DIGITAL SNAKE 17. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Digital Snake hooked up, and you’re probably not going to read the manual first (sigh!). So the next section is a Quick-Start Guide to help you get the DS3232 set up fast so you can start using it right away.
DS3232. Setup The setup for the DS3232 depends on the mixing con- sole you are using it with. We’ll use the TT24 Digital Live Console as an example. Visit our website periodically to discover what other mixers are equipped to operate with the DS3232 (www.mackie.com).
Page 6
SOLO button. PAD: There is a 23 dB pad on each of the 32 inputs of the DS3232. Turn the pad on when using a mic with a particularly high output level, or when connecting a line- level input. In the TT24 touchscreen, the PAD indicator appears next to the GAIN control.
The routing of the 32 inputs on the DS3232 is config- ured by the mixing console. Generally, this will be done in the Setup window for the expansion cards where the U100 Network card is installed.
(included in the box with your DS3232) to the power receptacle, and plug the oth- er end of the linecord into an AC outlet. The DS3232 has a universal power supply that can accept any AC voltage ranging from 100 VAC to 240 VAC.
If the POWER LED is not illuminated, and you are certain that the AC outlet is live, it will be neces- sary to have your DS3232 serviced. There are no user serviceable parts inside. Refer to “Repair” at the end of this section to find out how to proceed.
“Support” and select “Locate a Service Center.” Service for Mackie products living outside the United States can be obtained through local dealers or distributors. If you do not have access to our website, you can...
Therefore, we reserve the right to change these specifications at any time without notice. “Mackie.” and the “Running Man” are registered trademarks of LOUD Technologies Inc. All other brand names mentioned are trademarks or registered trademarks of their respective hold- ers, and are hereby acknowledged.
MACKIE DS3232 BLOCK DIAGRAM TT24 ADAT Outputs When the DS3232 is used with the TT24, the ADAT outputs follow whatever channels have the internal processing assigned to them, analog or digital. To select the internal DSP assignment, press Setup, select Operation, and choose analog or digital for the Input DSP.
The RJ45 connector on the DS3232 uses a standard Cat5e Ethernet cable to make the connection between the DS3232 and the U100 Network card installed in the mixing console. A Cat5e cable offers improved perfor- mance over a Cat5 cable, including a higher bandwidth (350 MHz vs.
The Product Warranty will not extend to anyone other than the original purchaser of the product (hereinafter, “Customer,” “you” or “your”). For products purchased outside the U.S. or Canada, please visit www.mackie.com/warranty to find contact information for your local distributor, and information on any warranty coverage provided by the distributor in your local market.