Using The Memory Function; To View The Measurement Values Stored In Memory - ReliOn BP300W Instruction Manual

USING THE MEMORY FUNCTION

The monitor automatically stores the results up to 90 sets for each user (A and B).
It can also calculate an average reading based on the last 3 measurement values taken within
10 minutes.

TO VIEW THE MEASUREMENT VALUES STORED IN MEMORY

1. Select the user ID (A or B).
2. Press the Memory button to display the set of measurement values.
3. Press the Memory button repeatedly to view the values from the more recent to the
oldest.
NOTES: • The memory number appears for a second before the pulse rate is
displayed. The newest set is number "1".
• If the positioning indicator is set to "on" before the measurement, the
positioning indicator symbol displayed with the measurement values.
• If the memory is full, the monitor will delete its oldest value.
• The date and time are alternately displayed with the
measurement values.
• When viewing the measurement value taken without setting the date
and time, "-:--" is displayed instead of the date and time.
• If there are no measurement values stored in the memory,
the screen to the right is displayed.
4. Press the Start/Stop button to turn the monitor off.
TM
18