ReliOn BP300W Instruction Manual page 32

GUIDANCE AND MANUFACTURER'S DECLARATION
(Table 6)
Recommended separation distance between portable and mobile RF
communications equipment and the ReliOn
ReliOn 6021RELN2 is intended for use in an electromagnetic environment in
TM
which radiated RF disturbances are controlled. The customer or the user of this
ReliOn 6021RELN2 can help prevent electromagnetic interference by maintaining
TM
a minimum distance between portable and mobile RF communications equipment
(transmitters) and the ReliOn
the maximum output power of the communications equipment.
Output Power of
Transmitter in
Watt
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in meters (m) can be estimated using the equation applicable to
the frequency of the transmitter, where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.
Note: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
Note: These guidelines may not apply in all situations. Electromagnetic propagation
is affected by absorption and reflection from structures, objects, and people.
6021RELN2 as recommended below, according to
TM
Separation distance according to frequency of
transmitter in meter
150 kHz to 80 MHz
Not Applicable.
Not Applicable.
Not Applicable.
Not Applicable.
Not Applicable.
Not Applicable.
6021RELN2
TM
80 MHz to 800 MHz
d = 1.2 √ P
0.12
0.38
1.2
3.8
12
32
800 MHz to 2.5GHz
d = 2.3 √ P
0.23
0.73
2.3
7.3
23