Using The Memory Function - ReliOn HEM-780REL Instruction Manual

USING THE MEMORY FUNCTION

Every time you complete a measurement the monitor stores the blood
pressure and pulse rate for each user (A and B) in the memory.
The monitor automatically stores up to 84 sets of measurement values
(blood pressure and pulse rate) for each user (A and B). When 84 sets of
measurement values are stored, the oldest record is deleted to save the
most recent values.
AVERAGING FUNCTION
The monitor calculates the average reading based on up to the three
most recent sets of measurement values taken within 10 minutes of the
most recent reading.
NOTE: If two sets of measurement values are stored in the memory
for the 10 minute period, the average is based on the two sets
of measurement values. If one set of measurement value is
stored, this is displayed as the average.
TO DISPLAY THE MEASUREMENT VALUES
1. Press the On/off Start Button to turn the monitor on.
2. Select your User ID (A or B).
28