Using The Memory Function; Averaging Function; To Display The Measurement Values - ReliOn BP300 Instruction Manual

USING THE MEMORY FUNCTION

The monitor automatically stores up to 100 sets of measurement values (blood pressure
and pulse rate) for each user (A or B). When 100 sets of measurement values are
stored, the oldest record is deleted to save the most recent values.

AVERAGING FUNCTION

The monitor calculates the average reading based on the three most recent sets of
measurement values taken within 10 minutes of the most recent reading.
NOTES: • If two sets of measurement values are stored in the memory for the 10
minutes period, the average is based on the two sets of measurement
values. If one set of measurement values is stored, this is displayed as the
average.
• When viewing the reading taken without setting the date and time, "-:--" is
displayed instead of the date and time.
• The average reading will not be calculated without setting the date and time.

TO DISPLAY THE MEASUREMENT VALUES

1. Select your USER ID (A or B).
2. Press the Memory button (
The Average Symbol (
reading is shown.
).
) appears on the display when the average
21