Basic Programming Modes - La Crosse Technology WS-2308 Operation Manual

MIN/MAX - key - In normal display mode to toggle between
display of MIN/MAX values
- To toggle between MIN/MAX values in
MIN/MAX mode
- To exit any programming mode
PLUS(+) – key - In normal display mode to toggle between
format of date display, seconds, time alarm
and time zone
- To increase the values in the setting modes
- To exit MIN/MAX modes
- In normal display mode to re-enter data
learning mode (long pressing for 2 seconds)
- In normal display mode to enable/disable the
MINUS(-) – key
buzzer alarm (long pressing)
- To decrease the values in the setting modes
- In basic programming mode acoustic storm
alarm ON/OFF
- To turn the alarms off 24 hours when the
alarm is sounding
- In MIN/MAX modes to resets recorded values
and recorded dates and times
* Press any key to activate the LED Backlight
13.

Basic Programming Modes

Manual Setting modes
The manual setting mode allows the user to change several basic set-
tings, which is done by accessing one mode after the other simply by
pressing the SET key. After the final mode, or if no key is pressed for 30
seconds, the manual setting returns to the normal display mode.
The manual setting takes the user through the following modes:
1. 8 level LCD contrast setting (default level 5)
2. Manual time setting (hours/minutes)
3. 12/24h time display select (default 24 hours)
4. Calendar setting (year/month/date)
5. Time zone setting ±12 hours (default 0)
6. Temperature display unit degree Celsius or Fahrenheit (default
degree Celsius)
7. Wind speed display units in m/s, km/h, mph, Beaufort, knots
(default setting km/h)
8. Rainfall display in mm or inch (default setting mm)
9. Air pressure display in hPa or inHg (default setting hPa)
62