Basic Programming Modes - La Crosse Technology WS-2317 Operation Manual

key
*Press any key to activate the EL backlight
13.

Basic Programming Modes

Manual Setting modes
The manual setting mode allows the user to change several
basic settings, which is done by accessing one mode after the
other simply by pressing the SET key. After the final mode, or
if no key is pressed for 30 seconds, the manual setting returns
to the normal display mode.
The manual setting takes the user through the following
modes:
1. 8 level LCD contrast setting (default level 5)
2. Manual time setting (hours/minutes)
3. 12/24h time display select (default 12 hours)
4. Calendar setting (year/month/date)
5. Time zone setting from 0 to +12 hrs, -1, -2, -3, AT -4, ET
-5, CT -6, MT -7, PT -8, AL -9, HA -10, -11, -12 (default
ET -5)
6. Temperature display unit degree Celsius or Fahrenheit
(default degree Fahrenheit)
7. Wind speed display units in m/s, km/h, mph, Beaufort,
knots (default setting mph)
8. Rainfall display in mm or inch (default setting inch)
9. Air pressure display in hPa or inHg (default setting inHg)
10. Relative air pressure setting from 27.10 inHg – 31.90
inHg (default 29.98 inHg)
11. Weather forecast sensitivity setting 6, 9, 12 inHg (default
setting 9 inHg)
enable/disable the buzzer alarm (long
pressing)
- To decrease the values in the setting
modes
- In basic programming mode audible
storm alarm ON/OFF
- To snooze the alarms off 24 hours
when the alarm is sounding
- In MIN/MAX modes to reset recorded
values and recorded dates and times
23