La Crosse Technology WS-2308 Operation Manual page 25

Indoor humidity high alarm and low alarm setting
1) Press the ALARM key to enter the normal time alarm
2) Continue to press the ALARM key until you reach the indoor humid-
ity high alarm set mode
3) Press and hold the SET key to enter the indoor humidity high setting
values (% digits will start flashing) and set the desired indoor humid-
ity high by using the PLUS(+) or MINUS (-) keys
4) Press ALARM key to confirm and press the MIN/MAX key to return
to the normal display mode or press the ALARM once more to toggle
to the indoor humidity low alarm set mode.
5) Press and hold the SET key to enter the indoor humidity low setting
values (digits will start flashing) and set the desired indoor humidity
low by using the PLUS(+) or MINUS(-) keys
6) Press ALARM key to confirm and press the MIN/MAX key to return
the normal display mode or press the ALARM once more to toggle to
another alarm setting mode.
Outdoor humidity high alarm and low alarm setting
1) Press the ALARM key to enter the normal time alarm
2) Continue to press the ALARM key until you reach the outdoor
humidity high alarm set mode
3) Press and hold the SET key to enter the outdoor humidity high set-
ting values (digits will start flashing) and set the desired outdoor hu-
midity high by using the PLUS(+) or MINUS (-) keys
4) Press ALARM key to confirm and press the MIN/MAX key to return
to the normal display mode or press the ALARM key once more to
toggle to the outdoor humidity low alarm set mode.
5) Press and hold the SET key to enter the outdoor humidity low setting
values (digits will start flashing) and set the desired outdoor humidity
low by using the PLUS(+) or MINUS(-) keys
6) Press ALARM key to confirm and press the MIN/MAX key to return
the normal display mode or press the ALARM once more to toggle to
the to enter another alarm setting mode.
Wind chill high alarm and low alarm setting
1) Press the ALARM key to enter the normal time alarm
2) Continue to press the ALARM key until you reach the wind chill high
alarm set mode
3) Press and hold the SET key to enter the wind chill high setting val-
ues (digits will start flashing) and set the desired wind chill high by
using the PLUS(+) or MINUS (-) keys
67