Basic Programming Modes - La Crosse Technology WS-2306 Operation Manual

- To exit MIN/MAX modes
- To reset general alarm symbol
MIN/MAX -
- In normal display mode to toggle between
key
display of MIN/MAX values
- To toggle between MIN/MAX values in
MIN/MAX mode
- To exit any programming mode
- To exit various setting modes
PLUS (+) – - In normal display mode to toggle between
key
format of date display, seconds, time alarm
and time zone
- To increase the values or make the
adjustments for the values in the setting
modes
- To exit MIN/MAX modes
- In normal display mode to re-enter data
learning mode (long pressing for 2 seconds)
MINUS (-) –
- In normal display mode to enable/disable the
key
buzzer alarm (long pressing)
- To decrease the values or make the
adjustments for the values in the setting
modes
- In basic programming mode audible storm
alarm ON/OFF
- To turn the alarms off 24 hours when the
alarm is sounding
- In MIN/MAX modes to reset recorded values
and recorded dates and times
*Press any key to activate the E.L backlight
13.

Basic Programming Modes

Manual Setting modes
The manual setting mode allows the user to change several basic
settings, which is done by accessing one mode after the other simply
by pressing the SET key. After the final mode, or if no key is pressed
for 30 seconds, the manual setting returns to the normal display
mode.
The manual setting takes the user through the following modes:
1. 8 level LCD contrast setting (default level 5)
2. Manual time setting (hours/minutes)
3. 12/24h time display select (default 24 hours)
4. Calendar setting (year/month/date)
23