Basic Installation Options - La Crosse Technology C79790V2 Setup Manual

Hide thumbs Also See for C79790V2:

Faq (24 pages)

Table Of Contents

Table of Contents

Positioning the Breeze Pro Sensor

For Accurate Measurements

•

Ensure the sensor is mounted level with the Solar Panel facing

directly to the south. This will help optimize battery life and transmit

correct wind direction readings.

•

Ideally, the Breeze Pro Sensor should be mounted on the tallest

object in your area. Avoid positioning the sensor in line or below

eaves, rooflines, trees, or other objects that may obstruct wind

readings.

•

Make sure all screws on the Mounting Bracket, Winds Cups, and

Wind Vane, are securely fastened.

•

The sensor should be mounted with the Wind Cups on top.

Included Mounting Accessories

Mast

The horizontal conduit where the sensor

attaches. This piece will connect to either

the Adjustable Base or Pole Adapter.

Adjustable Base

The main bracket used for mounting onto flat surfaces or with

added U-bolts (not included). The grooves and Hand Screw allow

the bracket to secure to angled surfaces while still ensuring the

Mast and sensor are level.

Hand Screw

Used to lock down and secure the Mast

to the Adjustable Base or Pole Adapter.

Alignment Arrows

Provide exact 90 or 180 degree

angles when aligned with the arrow

on the Mast.

Pole Adapter

Used in place of the Adjustable Base

for mounting on top of cylindrical

conduits.

1-Inch Maximum Pole Diameter

BASICS