Table of Contents
Advertisement
6) Press ALARM key to confirm and press the MIN/MAX key to return
the normal display mode or press the ALARM once more to toggle to
another alarm setting mode.
Wind direction alarm setting
1) Press the ALARM key to enter the normal time alarm
2) Continue to press the ALARM key until you reach the wind direction
alarm set mode
3) Press and hold the SET key to enter the wind direction setting val-
ues.
4) Using the PLUS(+) or MINUS (-) keys select the desired wind direc-
tion and use the SET key to confirm or cancel each direction input
5) Press ALARM key to confirm and press the MIN/MAX key to return
the normal display mode or press the ALARM once more to toggle to
another alarm setting mode.
Storm warning alarm setting
Unlike the other weather alarms, the storm warning alarm is set by en-
tering the main manual setting mode as follows:
10) Press the SET key to enter the manual setting mode
11) Continue to press the SET key until the Storm warning icon flashes
(tendency arrow flashing downwards with the pressure values flash-
ing)
12) Set the desired hPa pressure value (3 hPa - 9 hPa) using the
PLUS(+) or MINUS(-) keys
13) Press the MIN/MAX key to confirm and return to the normal display.
Storm warning alarm ON/OFF
After storm warning alarm setting, the next mode to appear after press-
ing the SET key is the storm warning ON/OFF. Use the PLUS(+) or
MINUS(-) key to change the status to AON or AOFF. Default setting is
ON:
Should the air pressure drop equal or below the pre-set hPa value
within the last 6 hour period, then the downward tendency arrow will
flash as an indication of possible storm. The base station will take hourly
measurements as a point of reference. The storm-warning indicator will
stop flashing once the air pressure becomes more stable.
70
Hide quick links:
Advertisement
Table of Contents
