4-Port 10 Gigabit Ethernet Modular Port Adapter - Cisco ASR 9001 Hardware Installation Manual

4-Port 10 Gigabit Ethernet Modular Port Adapter

LED Label
STATUS
4-Port 10 Gigabit Ethernet Modular Port Adapter
The 4-Port 10 Gigabit Ethernet modular port adapter provides four cages for XFP Ethernet optical interface
modules that operate at a rate of 10 Gbps. The four XFP modules can be 10-Gigabit Ethernet multimode or
single mode connections.
Each XFP cage on the 4-Port 10 Gigabit Ethernet modular port adapter has an adjacent Link LED visible on
the front panel. The Link LED indicates the status of the associated XFP port, as described in
on page 99
The following figure shows an example of the 4-Port 10 Gigabit Ethernet modular port adapter.
Figure 45: 4-Port 10 Gigabit Ethernet Modular Port Adapter
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
60
Color
Off
Green
Amber
section.
Installing Modules and Cables in the Chassis
State Meaning
Off Modular port adapter
power is off.
On Modular port adapter is
ready and operational.
On Modular port adapter
power is on and good, and
modular port adapter is
being configured.
Status LEDs,