Ac Powered Routers - Cisco ASR 9001 Hardware Installation Manual

Power Connection Guidelines
Each Cisco ASR 9001 Router is powered by only one type of input: AC or DC. A hybrid (AC+DC) power
Caution
configuration is not supported.
Proper grounding is necessary to avoid damage from lightning and power surges. See
Caution
Unit Bonding and Grounding Guidelines, on page 22

AC Powered Routers

AC power modules operate in the input range of 100 VAC to 240 VAC, 50 to 60 Hz and require a minimum
service of:
• 15 A for operation in North America and Japan
• 10 A for international operation
• 13 A for operation in the UK
Each of the AC power inputs requires a separate dedicated branch circuit. For a list of the nominal and
acceptable value ranges for source AC power, see
The following table lists the AC-input power cord options, specifications, and Cisco product numbers for the
AC-input power supply modules. This table also references power cord illustrations. For more information
on Cisco product numbers (PIDs) and their detailed description of power cords, refer to Dynamic Configuration
Tool.
Table 2: AC-Input Power Cord Options for ASR 9001 Router
Locale
USA
Japan
Australia
Italy
Argentina
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
14
Part Number Length
CAB-AC 8.2 feet (2.5 m)
CAB-L620P-C13-JPN 8.2 feet (2.5 m)
CAB-ACA 8.2 feet (2.5 m)
CAB-ACI 8.2 feet (2.5 m)
CAB-ACR 8.2 feet (2.5 m)
for grounding requirements.
AC Input Voltage Range, on page
Power Cord Rating
15 A, 250 V
15 A, 250 V
10 A, 250 V
10 A, 250 V
10 A, 250 V
Preparing for Installation
NEBS Supplemental
122.
Reference
Illustration
Figure 9: AC Power
Cord CAB-AC
Figure 10: AC
Power Cord
CAB-L620P-C13-JPN
Figure 11: AC
Power Cord
CAB-ACA
Figure 12: AC
Power Cord
CAB-ACI
Figure 13: AC
Power Cord
CAB-ACR