Displaying And Maintaining Arp - HP FlexNetwork MSR2003 Configuration Manual

To enable the ARP logging function:
Step
1. Enter system view.
2. Enable the ARP logging
function.

Displaying and maintaining ARP

IMPORTANT:
Clearing ARP entries from the ARP table might cause communication failures. Make sure the entries
to be cleared do not affect current communications.
Execute display commands in any view and reset commands in user view.
Task
Display ARP entries (centralized devices
in standalone mode).
Display ARP entries (distributed devices
in standalone mode/centralized devices in
IRF mode).
Display ARP entries (distributed devices
in IRF mode).
Display the ARP entry for an IP address
(centralized devices in standalone mode).
Display the ARP entry for an IP address
(distributed devices in standalone
mode/centralized devices in IRF mode).
Display the ARP entry for an IP address
(distributed devices in IRF mode).
Display the ARP entries for a VPN
instance.
Display the aging timer of dynamic ARP
entries.
Clear ARP entries from the ARP table
(centralized devices in standalone mode).
Clear ARP entries from the ARP table
(distributed devices in standalone
mode/centralized devices in IRF mode).
Clear ARP entries from the ARP table
(distributed devices in IRF mode).
Command
system-view
arp check log enable
Command
display arp [ [ all | dynamic | static ] | vlan vlan-id | interface
interface-type interface-number ] [ count | verbose ]
display arp [ [ all | dynamic | static ] [ slot slot-number ] | vlan
vlan-id | interface interface-type interface-number ] [ count |
verbose ]
display arp [ [ all | dynamic | static ] [ chassis chassis-number
slot slot-number ] | vlan vlan-id | interface interface-type
interface-number ] [ count | verbose ]
display arp ip-address [ verbose ]
display arp ip-address [ slot slot-number ] [ verbose ]
display arp ip-address [ chassis chassis-number slot
slot-number ] [ verbose ]
display arp vpn-instance vpn-instance-name [ count ]
display arp timer aging
reset arp { all | dynamic | interface interface-type
interface-number | static }
reset arp { all | dynamic | interface interface-type
interface-number | slot slot-number | static }
reset arp { all | chassis chassis-number slot slot-number |
dynamic | interface interface-type interface-number | static }
6
Remarks
N/A
By default, ARP logging is disabled.