Download Print this page

Garmin GPS 19x NMEA 2000 Installation Instructions page 4

Gps antenna
Hide thumbs Also See for GPS 19x NMEA 2000:

Advertisement

Care Information
The case is constructed of high quality materials and
does not require user maintenance, except cleaning.
Cleaning the Case
Clean the outer casing of the device using a cloth
dampened with a mild detergent solution and then
wipe dry.
Avoid chemical cleaners and solvents that may
damage plastic components.
Specifications
Physical
Dimensions
(Diameter × Height)
Weight
NMEA 2000 drop
cable length
Temperature Range -22° to 176°F (-30° to 80°C)
Case Material
Compass-safe
distance
Power Input Source 9–16 Vdc, unregulated
Input Current
NMEA 2000 Load
Equivalency
Number (LEN)
NMEA 2000 PGN Information
Transmit
059392
ISO Acknowledgment
060928
ISO Address Claim
126208
NMEA - Command/Request/Acknowledge
Group Function
126464
Transmit/Receive PGN List Group Function
126992
System Time and Date
126996
Product Information
129025
Position - Rapid Update
129026
COG & SOG - Rapid Update
129029
GNSS Position Data
129539
GNSS DOPs
129540
GNSS Sats in View
Receive
059392
ISO Acknowledgment
059904
ISO Request
060928
ISO Address Claim
126208
NMEA - Command/Request/Acknowledge
Group Function
The GPS 19x is NMEA 2000 certified
Important Safety and Product
Information
Your GPS unit may use an internal, non-user-
replaceable battery for various purposes, such as the
real-time clock.
Do not remove or attempt to remove the non-user-
replaceable battery.
When disposing of the unit, take it to a professional
service, such as a waste electronics treatment
facility, to have the battery removed and recycled.
GARMIN MISC ACCESSORIES
3
/
in. × 1
/
in.
19
15
32
16
(91.6 mm × 49.5 mm)
7.1 oz (201 g)
19 ft., 8 in. (6 m)
Fully gasketed, high-impact plastic
alloy, waterproof to IEC 60529 IPX7
standards
5.9 in. (150 mm)
40 mA at 12 Vdc
2 (100 mA)
WARNING
damage to the unit. After submersion, be certain to
wipe and air dry the unit before reuse.
Declaration of Conformity
Hereby, Garmin, declares that this product is in
compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
Industry Canada Compliance
Category I radiocommunication devices comply
with Industry Canada Standard RSS-210. Category
II radiocommunication devices comply with
Industry Canada Standard RSS-310. This device
complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following
two conditions: (1) this device may not cause
interference, and (2) this device must accept any
interference, including interference that may cause
undesired operation of the device.
FCC Compliance
This product has been tested and found to comply
with Part 15 of the FCC interference limits for
Class B digital devices FOR HOME OR OFFICE
USE. These limits are designed to provide more
reasonable protection against harmful interference in
a residential installation, and are more stringent than
"outdoor" requirements.
Operation of this device is subject to the following
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that may
cause undesired operation.
This equipment generates, uses, and can radiate
radio frequency energy and may cause harmful
interference to radio communications if not installed
and used in accordance with the instructions.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and the receiver.
• Connect the equipment into an outlet that is on a
different circuit from the GPS unit.
• Consult the dealer or an experienced radio/TV
technician for help.
This product does not contain any user-serviceable
parts. Repairs should only be made by an authorized
Garmin service center. Unauthorized repairs or
modifications could result in permanent damage
to the equipment, and void your warranty and
your authority to operate this device under Part 15
regulations.
MISCELLANEOUS PARTS

Advertisement

loading