Advertisement
92
80
STEP 28
• Loop LAT CABLE (92) around pulley in FLOATING PULLEY BRACKET (22) as shown in FIGURE 27.
• Screw the threaded end of LAT CABLE (92) into the end of the WEIGHT STACK SHAFT (80) until the FLOATING PULLEY BRACKET
(22) firmly contacts the end cap on the TOP BOOM (7) and the CABLE (92) slightly pulls on the HEAD PLATE (81). Tighten the jam
nut securely. See FIGURE 28.
STEP 29
• Assemble one 3-1/2" PULLEY (79) to the other FLOATING PULLEY
BRACKET (22) using one 3/8 X 1-3/4" BOLT (36) and one 3/8" LOCK-
NUT (48) as shown in FIGURE 29.
• Attach two 1" X 1" GLIDES (87) to the bottom of the second FLOAT-
ING PULLEY BRACKET (22) as shown.
1/2
0
22
1/2
1
2
3/8 X 1-3/4" 36
FIGURE 29
1/2
1/2
3
21
87
1/2
4
5
FIGURE 28
22
48
79
1/2
6
Advertisement
