30/ASSEMBLING ENGINE
Installing the shift lever
Installing the valve cover
Installing the spark plug
Position the generator cover. Mount screws
the generator cover have been mounted.
Specification
Screw generator cover
Mount screws
Specification
Screw generator cover
700011-11
Mount and tighten screw
Specification
Screw, generator cover
(through-hole for chain
shaft)
Check parts for damage and wear. Replace damaged or worn parts.
Position the shift lever. Fit and tighten screw
Specification
Screw, shift lever
700017-11
Check parts for damage and wear. Replace damaged or worn parts.
Position the valve cover seal.
Fit the valve cover. Mount and tighten screws
Specification
Screw, valve cover
700013-10
Fit and tighten the spark plug using a special tool.
Specification
Spark plug
Spark plug wrench (75029172000) (
700031-11
M6x25
and tighten all screws in a crisscross pattern.
M6x40
.
M6x25
M6
M6
M12x1,25
P. 181)
and tighten them after all screws of
10 Nm
(7.38 lbf ft)
10 Nm
(7.38 lbf ft)
®
10 Nm
Loctite
222
(7.38 lbf ft)
with collar sleeve.
®
10 Nm
Loctite
243™
(7.38 lbf ft)
.
10 Nm
(7.38 lbf ft)
15... 20 Nm
(11.06...
14.75 lbf ft)
110