KTM 450 EXC-R EU Repair Manual page 81

30/ENGINE - WORK ON INDIVIDUAL PARTS
When the crank pin is pressed in, oil hole
Marking
Info
If the oil holes are not correctly aligned, the conrod bearing will not be pro-
vided with oil.
200212-10
Place the crank web onto special tool
Plate - Pressing device (78029008000) (
Info
The special tool must be positioned with the flat surface facing downward.
Press the new crank pin
Check the oil hole with compressed air to ensure it is clear.
200213-10
Mount bearing
Info
Oil the bearing thoroughly.
200214-10
Position special tool
Press drift (75029047000) (
Plate - Pressing device (78029008000) (
Fit the crank web with the connecting rod and bearing. Position the second crank
web.
200215-10
Insert special tool
Plate - Pressing device (78029008000) (
Info
The flat surface of the special tool must face upward.
200216-10
Press the upper crank web all the way in.
Info
The press mandrel must be positioned above the crank pin.
Take the crankshaft out of the special tool and check that the connecting rod can
move freely.
200209-10
is opposite from oil hole and must be on the outside after mounting.
.
all the way in.
and connecting rod .
and onto the press.
P. 180)
.
must be aligned with oil hole
P. 182)
P. 182)
P. 182)
79
.