Section 2: Programming Indepth; System Configuration; The Configurator - NEC UX5000 Quick Setup Manual

Section 2: Programming inDepth

Section 2: Programming inDepth
There are three components within inDepth that will need configuring:
1.
2.
3.
This Quick Start guide will deal with system configuration, the other two sections are not covered here as
they will be personal to each site and will evolve over time.
System Configuration
The Configurator can be accessed from the Configurator icon on the tool bar (wrench icon) of either the Real
Time client or the Reporter client or from by double-clicking MISCFG.EXE in C:\inDepthUX5000\US on
the server.
The Configurator
When the Configurator loads, you will be presented with a series of "Tabs" representing the following
devices:
1.
2.
3.
4.
inDepth Quick Setup Guide for the UX5000
The system configuration which is done via the Configurator
The screen layouts
The report templates
Lines and DIDs
Extensions and Agents
Account Codes
Miscellaneous
inDepth Basic Setup Guide
Section 2: Programming inDepth
◆ 7