Adjusting Matrx Backrests; Adjusting Flex3 Tension Adjustable Backrest; Setting Anterior Tilt; Anterior Tilt - Invacare Modulite Pronto M41 Service Manual

Regular seat width
Loosen screw in position A or B.
1.
2. Adjust recline to desired angle.
3. Tighten screws in position A or B.

4.7.6 Adjusting Matrx backrests

See corresponding manual.

4.7.7 Adjusting Flex3 tension adjustable backrest

For adjustment of Flex3 tension adjustable backrest, see
user manual.

4.8 Setting anterior tilt

4.8.1 Anterior tilt

The seating system can be set to a predefined anterior tilt.
For TDX SP2 and TDX SP2 Low-Rider:
•
5° anterior tilt which reduces the maximum possible tilt by 5°
Orientation of tilt wedge
5° anterior tilt
1604311-A
Seat width 53
Setting tilt
CAUTION!
Risk of strains from lifting heavy parts!
– Use proper lifting techniques.
Tools:
•
6 mm Allen key
1. Remove seat.
2. Align tilt wedge with holes on module and in the desired
orientation. See graphics above.
3. Insert screws and tighten.
4. Align seat with holes on tilt wedge and install.
Anterior tilt — replacing battery front cover
Tools:
•
14 mm (5/8") Allen key
1. Remove the front cover as described in the service manual of
TDX SP2.
2.
Push the recessed front cover A down on the hooks B.
Re-tighten the screws C finger-tight.
3.

4.9 Adjusting adapter for universal seat

4.9.1 Adjusting universal seat adapter width

Tools:
•
3 mm Allen key
•
10 mm wrench
1.
Loosen and remove four screws A.
2. Put seating plate on top of adapter plates.
Service
17