Fiber Optic Ethernet Ports - Siemens RUGGEDCOM RS900GP Installation Manual

Chapter 3
Communication Ports
8
Figure 14: RJ-45 Port Pin Configuration
Figure 15: Micro-D Port Pin Configuration
Specifications
For further specifications, refer to
Section 3.3

Fiber Optic Ethernet Ports

Optional 100Base-FX, 1000Base-SX and 1000Base-LX fiber optic Ethernet ports are available for ports 9 and
10 with either LC (Lucent Connector), SC (Standard or Subscriber Connector), ST (Straight Tip) connectors.
Make sure the Transmit (Tx) and Receive (Rx) connections of each port are properly connected and matched to
establish a proper link.
18
1
1 5
6 9
Section 4.4, "Copper Ethernet Port
Name
Pin
10/100Base-TX 1000Base-TX
1 RX+
2 RX-
3 TX+
4 Reserved (Do Not Connect)
5 Reserved (Do Not Connect)
6 TX-
7 Reserved (Do Not Connect)
8 Reserved (Do Not Connect)
Pin 10/100Base-TX
1 RX+
2 Reserved (Do
Not Connect)
3 Reserved (Do Not Connect)
4 Reserved (Do
Not Connect)
5 TX+
6 RX-
7 Reserved (Do
Not Connect)
8 Reserved (Do
Not Connect)
9 TX-
Specifications".
RUGGEDCOM RS900GP
Installation Guide
Description
BI_DB+ Receive Data+
or Bi-Directional
BI_DB- Receive Data-
or Bi-Directional
BI_DA+ Transmit Data+
or Bi-Directional
BI_DA- Transmit Data-
or Bi-Directional
1000Base-TX
A+
C+
D+
B+
A-
C-
D-
B-
Fiber Optic Ethernet Ports