Panasonic FP0 Series Specifications page 9

FP0 Communication
Easier maintenance than ever before
Maintenance saving
Program memory uses EEPROM. In addition, programs can be changed even in RUN mode!
Overwrite function in RUN mode
It is possible to overwrite a program while the FP0 is running, such as during program debugging and startup
adjustments.
Backup battery unnecessary
The program memory uses EEPROM. The program and device contents can be stored without a backup battery, and
even programming for a machine builder is safe.
Password function
A password function can be set in order to change a program. Limited to people authorized to make program changes,
protection can be guaranteed better than ever.
Input/output verification LED
Every unit is equipped with LED I/O indicators, housed within a compact body. Input/output status can be verified
at a glance.
Simple installation
Comes with either terminal block or connector. Either type is easy to connect to wiring by simply
removing the terminal section.
Terminal block
Compatible models
FP0-C10RS, C10CRS, C14CRS, E8RS, E16RS
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Terminal type can be
plugged straight in without
resorting to crimping (made
by Phoenix Contact Co.).
Can handle wires from
0.3 to 1.25mm 2 .
10/2004
MIL connector
Unit connectors can be used
with 16-points and 32-points
units. Due to the loose-wiring,
pressure contact type design,
wiring is easy without the
need for insulation.
(MIL-C-83503)
Compatible models
FP0-C16T/C16P/C16CT/C16CP, C32T/C32P/C32CT/C32CP,
E16T/E16P, E32T/E32P,
FP0-T32CP/T32CT
9