4
SPECIFICATION
4.4
SLOPES _______________________________________________________
DO NOT USE ON SLOPES GREATER THAN 15°.
The slope 15° was calculated using static stability measurements according to the requirements of
BS EN 836.
4.5
RECOMMENDED LUBRICANTS ____________________________________
Engine oil: Should be to MIL-L-2104C or to A.P.I. Classification SE/SF/SG grades. [10W-30].
TEMPERATURE
OIL VISCOSITY
-20°C - +32°C
SAE10W-30
-15°C - +40°C
SAE 15W-40
Grease: Lithium based general purpose grease
en-14