Ransomes Super Certes 51 Safety, Operation & Maintenance Manual page 33

9. When you operate on gradients, or near drop off points, decrease the speed and be careful. Read the
Section 3.7.
10. To clean the cutting units, use a brush to remove grass from the cutting cylinder. The cutting cylinder
blades are sharp and can cause injuries. Never use the hands to clean the cutting cylinder, injury can
occur. Never try to clean the cutting cylinder blades while the machine is running.
11. Before you remove the grassbox, disengage the cylinder clutch and apply the parking brake.
Disengage the drives, engage the
parking brake and stop the engine.
Before you clean, adjust or repair this
DO NOT USE ON GRADIENTS OF MORE THAN
CAUTION
equipment.
WARNING
15°
7 OPERATION
en-33