Panasonic KX-TDA15 User Manual page 59

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA15:
Table of Contents

Advertisement

For simple operation, you can automatically hold a call by pressing another CO, ICD
Group or INTERCOM button, only if preprogrammed. (Automatic Call Hold) Consult your
dealer.
Holding in a System Parking Zone (Call Park)
You can put a call on hold in a common parking zone of the PBX so that any extension can retrieve
the parked call. You can use this feature as a transferring feature.
A call can be put into either a specified parking zone (Specified) or any idle parking zone (Auto). If a
Call Park button and Call Park (Automatic Park Zone) button have been established, you can select
either way to park by simply pressing the corresponding button.
When a call is parked automatically, or more than one call has been parked at the same time, you
need to specify the parking zone number to retrieve the required call.
To set
PT/PS
During a conversation
(Call Park)
Press Call Park.
PT/PS
During a conversation
TRANSFER
Press TRANSFER.
SLT
During a conversation
OR
Press Recall/
hookswitch.
5
2
Enter
52.
Enter a specified parking
zone number (2 digits) or press
automatically.
If you hear a busy tone, enter another
parking zone number or press
5
2
Enter
52.
Enter a specified parking
zone number (2 digits).
If you hear a busy tone, enter another
parking zone number.
parking zone no.
Specified
OR
Auto
to park at an idle parking zone
again.
parking zone no.
1.4 During a Conversation
C.Tone
On-hook.
C.Tone
On-hook.
User Manual
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda30Kx-tda200Kx-tda100

Table of Contents