Refusing Incoming Calls (Do Not Disturb [Dnd]) - Panasonic KX-TDA15 User Manual

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA15:
Table of Contents

Advertisement

1.7 Setting the Telephone According to Your Needs
1.7.2

Refusing Incoming Calls (Do Not Disturb [DND])

You may set this feature when you are in a meeting or busy.
To set/cancel
PT/SLT/PS
Off-hook.
When using a proprietary telephone, you can set or cancel Do Not Disturb by pressing the
FWD/DND button (fixed button) instead of " 710".
The FWD/DND button light shows the current status as follows:
Off: Both features are not set.
Red on: FWD mode
Flashing red slowly: DND mode
The system has two modes: (1) FWD/DND Cycle Switch Mode and (2) FWD/DND Setting
Mode. Ask your manager what mode your system is in if you are not sure.
(1)
When in the FWD/DND Cycle Switch Mode:
Pressing the FWD/DND button (fixed button) while in idle status will cycle the setting
as shown below:
(2)
When in the FWD/DND Setting Mode:
Pressing the FWD/DND button (fixed button) while in idle status will take you directly
to the programming mode for the FWD/DND setting.
(Refer to "3.1.2 Settings on the Programming Mode".)
Note
A FWD/DND button (customised button) is always in FWD/DND Cycle Switch Mode: the
mode cannot be changed.
If your extension has set this feature, a calling extension will hear DND tone.
If this feature is set, the Call Forwarding (FWD) feature does not work.
Specified extensions can override this feature and call DND extensions (DND Override).
96
User Manual
7
1
Enter
71.
Enter 0 to 2 as you desire.
FWD
DND
0
Both Calls
OR
1
Outside Calls
OR
Intercom Calls
2
Off
1
Set
OR
C.Tone
0
Cancel
Enter 1 to set
or 0 to cancel.
On-hook.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda30Kx-tda200Kx-tda100

Table of Contents