System Restart - Panasonic KX-TD1232 Installation Manual

2.8 System Restart

2.8.1 System Restart
After starting the system, if the system does not operate properly, restart the system.
Before restarting the system, try the system feature again to confirm whether there definitely
is a problem or not.
System Restart causes the following:
a)
Camp-on is cleared.
b)
Calls on Hold are terminated.
c)
Calls on Exclusive Hold are terminated.
d)
Calls in progress are terminated.
e)
Call Park is cleared.
Other data is not cleared by System Restart.
1. Make sure that the System Clear Switch is set to the "NORMAL" position.
2. Press the Reset Button with a pointed tool.
Notice
After pressing the Reset Button, if you notice that the System Clear Switch is set to the
"CLEAR" position, never slide the System Clear Switch to the "NORMAL" position within 20
seconds. Otherwise, all the system programming data are reset to default values (Refer to
2.9.1 System Data Clear). Wait at least 30 seconds, then slide to the "NORMAL" position.
Then the system will work as before.
If the system still does not operate properly, please see 5.1.4 Using the Reset Button.
Installation Manual
General Installation
127