Panasonic KX-TD1232 Installation Manual page 126

General Installation
KX-TD1232
Notice
• After pressing the Reset Button, slide the System Clear Switch to the "NORMAL" position
at step 6 while the power indicator is flashing (within approximately 10 seconds).
Otherwise, the system will not start up with the default values.
CAUTION
The power socket wall outlet should be located near this equipment and be easily accessible.
Once you start up the system and you turn the power off, do not perform the above procedure
to start the system again. Otherwise, your programmed data will be cleared. To start the
system, just turn the Power Switch on.
The power outlet should be located near this equipment and easily accessible.
126
Power Indicator
System Clear
Switch
SYSTEM
CLEAR
CLEAR
NORMAL
RESET
Reset Button
To AC Outlet
Power
Switch
Installation Manual