Printer And Pc Connection - Panasonic KX-TD1232 Installation Manual

General Installation

2.3.8 Printer and PC Connection

A user-supplied printer or personal computer (PC) can be connected to the system. These are
used to print out or refer to the Station Message Detail Recording (SMDR) call records and
system programming data.
Connect the printer cable or the PC cable to the Serial Interface (RS-232C) connector. The
cable must be shielded and the maximum length is 2 m (6.5 feet).
Note
The KX-TD1232 is illustrated as the main unit.
Arrange cables so that the printer will be connected to the system as shown in the chart on the
following page.
When using special accessories such as cable, the user should use those specified in this
installation manual to comply with the limits for a class A digital device pursuant to the FCC
Rules.
66
Serial Interface
(RS-232C) (25-pin)
Printer or
Installation Manual
Computer