Panasonic KX-TD1232 Installation Manual page 108

General Installation
3.
Insert the wires coming from the door openers into holes and tighten the screws.
Pass all the wires through the Holder.
Note
• The KX-TD1232 is illustrated as the main unit.
• Set the door opener paired with the doorphone.
• For wiring, UL 1015, AWG 22 twisted wire or the equivalent is recommended.
• The wire should be between 1.2 and 2.4 mm (3/64 and 3/32 inch) in diameter including the
coating.
D=1.2-2.4 mm (3/64-3/32 inch)
108
Holder
To door opener 4
To door opener 3
To door opener 2
To door opener 1
Installation Manual