General Installation
Installing to the Optional 4-CO Line Unit
The following procedure must be done before installing the 4-CO Line Unit (KX-TD180) to
the main unit.
1.
Loosen the five screws located at the rear of the 4-CO Line Unit.
2.
Remove the back plate and take out the P-board.
3.
Attach the Caller ID Card to the P-board, fitting the connectors.
4.
Put the P-board back into the cabinet and fix the rear plate with the five screws.
Note
For installing the 4-CO Line Unit to the main unit, refer to 2.4.6 Installing Expansion Unit.
Programming Guide Reference
[110] Caller ID Code Set
[111] Caller ID Name Set
[125] Area Code Assignment
[126] Caller ID Modification for Local Call
[127] Caller ID Modification for Long Distance Call
[406] Caller ID Assignment
Features Guide Reference
Caller ID
98
back plate
P-board
KX-TD193
CALLER ID
Caller ID Card
Installation Manual