SecurityPhone.book 41 ページ 2004年7月21日 水曜日 午後6時58分
Voice Status
The phone announces faulted zones and a current security status when this feature
is turned on.
Refer to "Checking For Open Zones" on page 14 in the 3000EN Security Systems
User's Guide.
Make sure all perimeter doors and windows are closed and
displayed.
Base Unit
Press [ADT].
1
Scroll to "VOICE STATUS" by pressing [d] or
2
[B], then press [g].
• The current status of the phone is displayed and
announced.
• Pressing [*] within 20 seconds advances/repeats
voice annunciation for faulted zones.
3
Press [STOP] to go to the standby mode.
Handset
: Press the soft key (
cordless handset. Press [OFF] to go to the standby mode.
Checking the Current Status
g
), and follow step 2 above, using the
ADT
is
READY
VOICE STATUS
41