Panasonic K10059 User Manual page 26

SecurityPhone.book 26 ページ ２００４年７月２１日 水曜日 午後６時５８分
Security Codes & Authority Levels
Press [g] (ENTER).
8
• If a confirmation tone (one beep) is not heard, you
entered the wrong security code in step 5 or wrong
user number in step 6. The setting is not saved.
Try again from step 4.
Press [STOP] to go to the standby mode.
9
Handset
: Press the soft key (
page, and enter the user number of 2 digits (03 to 49), using the cordless
handset. Press the soft key (
Press the soft key (
26
), follow steps 2 to 5 on the previous
ADT
). Follow step 7 on the previous page.
OK
), then press [OFF] to go to the standby mode.
OK